Table of Contents
Advertisement
Setting the Station Memory Preset buttons
Your radio is equipped with 6 station
memory buttons. These buttons can be used
to select up to 6 preset AM stations and 12
FM stations (6 in FM1 and 6 in FM2).
Follow the easy steps below to set these buttons
to the desired frequencies:
1. Select a band, then select a frequency.
2. Press one of the memory buttons and hold
the button until the sound returns. That
station is now held in memory on that
button.
3. Follow the two steps above for each station
memory preset button you want to set.
NOTE: If the vehicle's battery is disconnected,
the station memory preset buttons will
need to be reset.
Adjusting the tone balance and speaker
output of your radio
Increasing or decreasing bass response
Push the "AUDIO" button repeatedly until
the display reads "BASS." Push the right (+)
side of the "VOLUME" button to increase
bass (more "lows"), and push the left ( )
side to decrease bass (less "lows").
Increasing or decreasing treble response
Push the "AUDIO" button repeatedly until
the display reads "TREB." Push the right (+)
side of the "VOLUME" button to increase
treble (more "highs"), and push the left ( )
side to decrease treble (less "highs").
144
Hide quick links:
Advertisement
Table of Contents
