Replacement Bulbs; Electrical System; Overload - Chevrolet 2010 Camaro Owner's Manual

3. Turn the bulb socket
counterclockwise and pull
the bulb straight out of the
lamp socket.
4. Install the new bulb.
5. Push the bulb straight into the
socket and turn clockwise to
reinstall.
6. Reinstall the license plate lamp
by lifting it through the facia
opening until the clip is in place.

Replacement Bulbs

Exterior Lamp
Daytime Running
Lamp (Up-level
vehicles)
Fog Lamp
Front Park and Turn
Signal Lamp
Halogen Headlamp
License Plate Lamp
Rear Turn Signal
and Taillamps
For replacement bulbs not listed
here, contact your dealer/retailer.

Electrical System

Electrical System
Bulb
Number

Overload

The vehicle has fuses and circuit
P13W
breakers to protect against an
electrical system overload.
PS24W
When the current electrical load
3457NAK
is too heavy, the circuit breaker
H13 opens and closes, protecting the
circuit until the current load returns
W5W
to normal or the problem is fixed.
3157K
This greatly reduces the chance of
circuit overload and fire caused by
electrical problems.
Fuses and circuit breakers protect
the following in the vehicle:
•
Headlamp Wiring
•
Windshield Wiper Motor
•
Power Windows and other Power
Accessories
Vehicle Care 9-41