Chevrolet 2010 Camaro Owner's Manual page 170

6-32 Infotainment System
Once connected, the person called
will be heard through the audio
speakers.
Using the Re-dial Command
b g
1. Press . The system
responds "Ready" followed
by a tone.
2. After the tone, say "Re-dial".
The system responds "Re-dial
using <phone name>" and
dials the last number called from
the connected Bluetooth phone.
Once connected, the person called
will be heard through the audio
speakers.
Receiving a Call
When an incoming call is received,
the audio system mutes and a
ring tone is heard in the vehicle.
b g
•
Press to answer the call.
c $
•
Press to ignore a call.
Call Waiting
Call waiting must be supported on
the Bluetooth phone and enabled by
the wireless service carrier to work.
bg
•
Press to answer an incoming
call when another call is active.
The original call is placed on hold.
bg
•
Press again to return to the
original call.
•
To ignore the incoming call,
no action is required.
c $
•
Press to disconnect the
current call and switch to the call
on hold.
Three-Way Calling
Three-Way Calling must be
supported on the Bluetooth phone
and enabled by the wireless service
carrier to work.
1. While on a call press
The system responds "Ready"
followed by a tone.
2. Say "Three-way call". The system
responds "Three-way call, please
say dial or call".
3. Use the dial or call command to
dial the number of the third party
to be called.
4. Once the call is connected,
press
together.
Ending a Call
c $
Press
Muting a Call
During a call, all sounds from inside
the vehicle can be muted so that
the person on the other end of
the call cannot hear them.
To Mute a call
1. Press
b g "Ready" followed by a tone.
.
2. Say "Mute Call". The system
responds "Call muted".
bg
to link all the callers
to end a call.
bg
. The system responds