License Plate Lamp; Replacement Bulbs - Chevrolet Suburban 2014 Owner's Manual

6. Press a new bulb into the bulb
socket and install the socket into
the taillamp assembly by turning
it clockwise.
7. Reinstall the taillamp assembly.
When reinstalling, make sure to
line up the pins on the taillamp
assembly with the vehicle. If this
is not done, the taillamp
assembly will not be able to be
installed correctly.

License Plate Lamp

1. Remove the two screws holding
each of the license plate lamps
to the molding that is part of the
liftgate.
2. Twist and pull the license plate
lamp assembly forward through
the molding opening.
3. Remove the bulb socket from
the lamp assembly by turning it
counterclockwise.
4. Pull the bulb straight out of the
socket and install the new bulb.
Vehicle Care
5. Reverse Steps 1 3 to reinstall
the license plate lamp.

Replacement Bulbs

Exterior Lamp
Back-up Lamp
License Plate Lamp
Rear Turn Signal
Lamp, Taillamp, and
Stoplamp
Side Marker Lamp
For replacement bulbs not listed
here, contact your dealer.
10-31
Bulb
Number
7441
W5WLL
3057
KX RD
194