Chevrolet 2010 Camaro Owner's Manual page 166

6-28 Infotainment System
Linking to a Different Phone
bg
1. Press . The system responds
"Ready" followed by a tone.
2. Say "Bluetooth". The system
responds "Bluetooth ready"
followed by a tone.
3. Say "Change phone". The system
responds "Please wait while I
search for other phones".
•
If another phone is found, the
response will be "<Phone
name> is now connected".
•
If another phone is not found,
the original phone remains
connected.
Storing Name Tags
The system can store up to thirty
phone numbers as name tags
that are shared between the
Bluetooth and OnStar systems.
The system uses the following
commands to store and retrieve
phone numbers:
•
Store
•
Digit Store
•
Directory
Using the Store Command
The store command allows a phone
number to be stored without
entering the digits individually.
bg
1. Press . The system responds
"Ready" followed by a tone.
2. Say "Store". The system
responds "Store, number please"
followed by a tone.
3. Say the complete phone number
to be stored at once with no
pauses.
•
If the system recognizes the
number the response is
"OK, Storing".
•
If the system does not
recognizes the phone number,
the response is "Store <Phone
number>". "Please say yes or
no". If the number is correct,
say "Yes". If the number is not
correct, say "No". The system
will ask for the number again.
4. After the system stores the
phone number, it responds
"Please say the name tag"
followed by a tone.