Chevrolet 2010 Camaro Owner's Manual page 165

3. Say "Pair". The system responds
with instructions and a four-digit
PIN number. The PIN number
will be used in Step 4.
4. Start the Pairing process on the
cell phone that will be paired to
the vehicle. Reference the
cell phone manufacturer user
guide for information on this
process.
Locate the device named
"General Motors" in the list on
the cell phone and follow the
instructions on the cell phone to
enter the four-digit PIN number
that was provided in Step 3.
5. The system prompts for a name
for the phone. This name will be
used to indicate which phone
is connected. The system
confirms the name.
6. The system responds "<Phone
name> has been successfully
paired" after the pairing process
is complete.
7. Repeat Steps 1 through 7 for
additional phones to be paired.
Listing All Paired and Connected
Phones
bg
1. Press . The system
responds "Ready" followed
by a tone.
2. Say "Bluetooth". The system
responds "Bluetooth ready"
followed by a tone.
3. Say "List". The system lists all
the paired Bluetooth devices.
The system will respond "is
connected" if a phone is
connected to the vehicle.
Infotainment System
Deleting a Paired Phone
bg
1. Press . The system responds
"Ready" followed by a tone.
2. Say "Bluetooth". The system
responds "Bluetooth ready"
followed by a tone.
3. Say "Delete". The system asks
which phone to delete followed
by a tone.
4. Say the name of the phone
to be deleted. If the phone name
is unknown, use the "List"
command for a list of all paired
phones. The system responds
"Would you like to delete <phone
name>? Yes or No" followed
by a tone.
5. Say "Yes" to delete the phone.
The system responds "OK,
deleting <phone name>".
6-27