Output Configuration - Extron electronics RGB-DVI 300 User Manual

Operation, cont'd

Output configuration

The output configuration is used to select a scaler output rate
from the various available resolution and refresh rates. Both
the RGB-DVI 300 and the RGB-HDMI 300 have a large range of
combinations of resolution and refresh rate (see table on pages
3-4 and 3-5).
Select output configuration from the main menu. Use the
[
refresh rate. Apply the settings by pressing the enter button, or
they will be applied automatically after 5 seconds.
In addition to the resolutions and refresh rates available in the
menu, two other options are available:
Auto — The unit receives EDID information from the display
device and adjusts the output signal to match the requirements
of the display.
Lock — The unit matches the resolution and refresh rate of the
output signal with those of the input signal.
When color space is selected, the two available options are RGB
(default) and YUV. Use the up/down rotary encoder to select
the desired value and then apply the setting by pressing the
enter button.
RGB-DVI 300 and RGB-HDMI 300 • Operation
3-14
knob to select a resolution. Then use the
{
knob to select a