Rack Mounting Procedures - Extron electronics RGB-DVI 300 User Manual

Rack mounting procedure
The unit can be mounted on any of these rack systems:
• RSU 129: 9.5" deep, 1U rack shelf kit (part # 60-190-01)
• RSB 129: 9.5" deep, 1U basic rack shelf (part # 60-604-01)
• RSU 126: 6" deep, 1U rack shelf kit (part # 60-190-10)
• RSB 126: 6" deep, 1U basic rack shelf (part # 60-604-10)
1. Remove rubber feet if these have been installed on the
bottom of the unit.
2. Align the holes in the base of the unit with holes in the
shelf. Secure the unit to the shelf with two 4-40 x 3/16"
screws in diagonally opposite corners (see the figure
below).
3. Install false faceplate(s) or other unit(s) on the rack shelf.
4. Attach the shelf to the rack with the four provided
10-32 x 3/4" bolts
Front false
faceplate
uses 2
screws.
Rack mounting
RGB-DVI 300 and RGB-HDMI 300 • Installation
6" Deep Rack Shelf
Use 2 mounting holes on
opposite corners.
1/2 Rack Width Front False
Faceplate
(2) 4-40 x 3/16"
Screws
2-3