Input Configuration - Extron electronics RGB-DVI 300 User Manual

time that source is used. Input presets are only valid for the
source/resolution that was active when the preset was saved.

Input configuration

The input configuration submenu is used to adjust input type,
total pixels, phase, horizontal and vertical video start, and
horizontal and vertical active areas.
N
With the start or active options, use the
horizontal values and the
Total pix and phase are adjusted by the
respectively.
Option
Input
Total Pix
Phase
Horizontal start
Vertical start
Active Pixels
Active Lines
RGB-DVI 300 and RGB-HDMI 300 • Operation
On the on-screen menu display, default values for the
current input rates, total pixels, H active, and V active
are accompanied by an asterisk (*).
{
knob to adjust the vertical values.
Minimum
RGB (default) or YUV
default value (depends on input resolution) ± 512
0
0
0
default value (depends on input resolution) ± 512
default value (depends on input resolution) ± 256
[
knob to adjust the
[ {
and knobs,
Maximum
31
255
255
3-13