Mounting The Scalers; Tabletop Placement; Rack Mounting; Ul Guidelines For Rack Mounting - Extron electronics RGB-DVI 300 User Manual

Installation

Mounting the Scalers

The 1" height and half rack width of the RGB-DVI 300 and
RGB-HDMI 300 units allow them to be mounted on a tabletop,
on racks, under furniture, or through furniture.

Tabletop placement

Attach the four provided rubber feet to the bottom of the unit
and place it in any convenient location.

Rack Mounting

UL guidelines for rack mounting

The following Underwriters Laboratories (UL) guidelines are
relevant to the safe installation of these products in a rack:
1.
2.
3.
4.
5.
RGB-DVI 300 and RGB-HDMI 300 • Installation
2-2
Elevated operating ambient temperature — If the unit
is installed in a closed or multi-unit rack assembly, the
operating ambient temperature of the rack environment
may be greater than room ambient temperature. Therefore,
install the equipment in an environment compatible with
the maximum ambient temperature (Tma: +122 °F, +50 °C)
specified by Extron.
Reduced air flow — Install the equipment in the rack
so that the equipment gets adequate air flow for safe
operation.
Mechanical loading — Mount the equipment in the rack
so that uneven mechanical loading does not create a
hazardous condition.
Circuit overloading — Connect the equipment to
the supply circuit and consider the effect that circuit
overloading might have on overcurrent protection
and supply wiring. Appropriate consideration of the
equipment nameplate ratings should be used when
addressing this concern.
Reliable earthing (grounding) — Maintain reliable
grounding of rack-mounted equipment. Pay particular
attention to supply connections other than direct
connections to the branch circuit (such as the use of power
strips).