Rear Panel Layout - Extron electronics RGB-DVI 300 User Manual

Rear Panel Layout

The illustration below shows the rear panel features of the
RGB-HDMI 300 (upper image) and RGB-DVI 300 (lower image):
POWER
12V
1.0A MAX
5
POWER
12V
1.0A MAX
Rear panel layout
e
Power input — Connect the 12 VDC external power supply
(provided) to this 3.5 mm, 2-pole captive screw connector.
f
RGB input — Connect an analog RGB or HDTV YUV video
input signal to this female 15-pin HD connector.
g
Digital signal output — Both models output digital signals.
The RGB-DVI 300 outputs a DVI-D signal through a female
DVI-I connector; the RGB-HDMI 300 outputs an HDMI signal
through a female HDMI connector.
h
RS-232 input — Both models can be configured by using SIS
commands or through the SPPCP. Either means of control is
provided through this 3.5 mm, 3-pole captive screw RS-232
serial port connector or the TRS config port on the front panel
( ). See chapter 4 for instructions about SIS commands and
2
control software.
RGB/ R-Y, Y, B-Y INPUT
6
RGB/ R-Y, Y, B-Y INPUT
RGB-DVI 300 and RGB-HDMI 300 • Operation
RGB - HDMI 300
DVI-D OUTPUT
RGB - DVI 300
RS-232
Tx Rx
HDMI OUTPUT
7 8
RS-232
Tx Rx
2-7