Cub Cadet 900 Series Professional Shop Manual page 33

7. Remove the two Torx
the throttle control to the dash panel using a T-
27 driver. See Figure 4.43.
Figure 4.43
8. If the tractor has a separate choke cable, discon-
nect it from the engine.
9. Remove the locking clip that holds the cruise
control / parking brake rod to the engagement
lever assembly. See Figure 4.44.
Figure 4.44
TM head screws that hold 10. Disengage the rod from the lever assembly.
NOTE: The rod is kept in slight tension by a light
spring that hooks between the frame and the
step in the middle of the rod. See Figure 4.45.
Rod
Spring
Figure 4.45
11. Remove the screws that hold the inside mount-
ing ears of the dash panel to the dash support
brackets using a 3/8" wrench. See Figure 4.46.
Internal
mounting ear
Screw
Dash support
bracket
Figure 4.46
BODY PANELS
27