Chapter 2: Engine Related Parts; Muffler - Cub Cadet 900 Series Professional Shop Manual

This manual will cover the engine accessories that are
manufactured by Cub Cadet.
IMPORTANT: Refer to the engine manufac-
turer's manual for engine specific service infor-
mation.

Muffler

Remove the muffler by following these steps:
NOTE: The muffler and the exhaust pipes are
welded together. They are replaced as one
assembly.
1. Remove the hood and bumper by following the
steps described in Chapter 4: Body/Chassis.
2. Remove the two screws on each side that
secure the muffler guard bracket.
See Figure 2.1.
Figure 2.1

CHAPTER 2: ENGINE RELATED PARTS

Remove these screws
3. Disconnect the muffler from the engine.
For single cylinder engines:
• Remove the two screws that secure the exhaust
pipe to the cylinder head. See Figure 2.2.
Remove these
screws
Figure 2.2
• Remove the screw that fastens the muffler sup-
port bracket to the cylinder head.
See Figure 2.2.
Remove this
screw
Support bracket
Figure 2.3
ENGINE RELATED PARTS
3