Fagor 3IF-ZONE95AC Instruction Manual page 55

OPERATION
Residual heat indicator
When the hot heating zone is switched off, „H" is displayed as the signal meaning „heating
zone is hot!".
During that time do not touch the
heating zone as you may burn
yourself and do not put on it any
objects that are sensitive to heat!
When the indicator goes off, you can touch
the heating zone but beware that it still has
not cooled down to the ambient temperature.
When power is not supplied, the
residual heat indicator is off.
Operating time limitation
In order to increase operational reliability,
the induction plate has an operating time
limiter for each heating zone. The maximum
operating time is determined according to the
previously selected level of heating power.
If you do not change the heating power level
for a long time (see table), the relevant heating
zone is switched off and the residual heat
sensor is activated. However, at any time you
can switch on and operate specific heating
zones, according to the user's manual.
Heating power Maximum ope-
level rating time in
1
2
3
4
5
6
7
8
9
P
hours
6
6
5
5
4
1,5
1,5
1,5
1,5
0,16
55