Table of Contents
Advertisement
46 Driver information system ›
Settings
Select driving data to be displayed
Applies to the 10
" Infotainment system:
strument cluster
Setting units
Applies to the 10
" Infotainment system:
Units
Speed limit warning
Usage
The system offers the possibility to set a speed limit
beyond which an acoustic warning signal will sound
and the following warning message appears in the
display of the instrument cluster.
Settings
Setting the speed limit
›
Select Warning at or
(depending on the display type)
and confirm.
›
When the vehicle is stationary, set the desired
speed limit and confirm.
›
While driving, drive at the desired speed and con-
firm it as the speed limit.
Resetting the speed limit
›
Select Warning at or
(depending on the display type)
and confirm.
›
To reset the speed limit, confirm the stored value.
If the journey is interrupted for more than 2 hours,
the set limit is deactivated, but the set value remains
stored.
Vehicle status
Display
Applies to the 10
" Infotainment system:
The vehicle status is displayed in the following menu
in the infotainment system:
›
Tap on .
›
By moving your finger sideways, choose the screen
with the menu item for vehicle status.
›
Select the menu item for vehicle status.
The following information is displayed:
Vehicle status related warning messages
▶
Display of information about the status of the
▶
START-STOPP system
Speed limit warning
Functionality
In the event of a system fault, messages regarding
Car In-
the fault in question are displayed on the instrument
cluster display when the ignition is switched on.
Messages in relation to faults can also be displayed in
the Infotainment.
System
played until the malfunctions have been remedied.
After the first display of the message, only the indi-
cator lights
played.
The warning messages will continue to be dis-
(Hazard) or
(Warning) are dis-
Advertisement
Table of Contents
