Table of Contents
Advertisement
Since start
Driving data from the time of switching on the ig-
▶
nition until the ignition is switched off again is stor-
ed in the memory. If the journey is interrupted for
more than 2 hours, the memory will be reset.
Long-term
The driving data of all trips up to a total of 99
▶
hours and 59 minutes driving time or 9999 km
driving distance are stored in the memory. If one of
the listed values is exceeded, the memory is reset.
Since refuel
Driving data from the last fuel tank are stored in
▶
the memory. The memory is reset the next time
the tank is filled.
Operation
Display driving data in the display of the instru-
ment cluster via the multi-functional steering
wheel
›
Select the menu item for the driving data in the
main menu in the instrument cluster display.
Display drive data in the Infotainment
The driving data is displayed in the following menu in
the infotainment system.
Menu item for driving data
Or:
Menu item for driving data
Select memory for driving data in the display of
the instrument cluster via the multifunction steer-
ing wheel and reset it
Select memory in infotainment
To select the memory, use the functional areas
in the following menu in the infotainment system.
Turn - Select entry /
A
set values
Press - Confirm en-
try
›
To select the memory
for the displayed driv-
ing data, press the set-
ting wheel
repeat-
A
edly.
›
To reset the memory,
hold the setting wheel
A.
Driver information system ›
Menu item for driving data
Or:
Menu item for driving data
Reset memory in infotainment
The memory is reset in the following menu in the in-
fotainment system.
Or:
Settings
Select the driving data to be displayed
The driving data to be displayed is selected in the
following Infotainment menu.
Or:
Set units
The units are set in the following Infotainment menu.
Or:
Speed limit warning
Usage
The system offers the possibility to set a speed limit
beyond which an acoustic warning signal will sound
and the following warning message appears in the
display of the instrument cluster.
Settings
Setting the speed limit
›
Select and confirm the menu item Warning at or
(depending on display type).
›
When the vehicle is stationary, set the desired
speed limit and confirm.
›
While driving, drive at the desired speed and con-
firm it as the speed limit.
Resetting the speed limit
›
Select and confirm the menu item Warning at or
(depending on display type).
›
To reset the speed limit, confirm the stored value.
If the journey is interrupted for more than 2 hours,
the set limit is deactivated, but the set value remains
stored.
Speed limit warning
67
Advertisement
Table of Contents
