Table of Contents
Advertisement
Select and reset the memory for driving data in
the display of the instrument cluster using the
control lever
.
A
Selecting the memory in the infotainment system
To select the memory, use the functional areas
in the following menu in the infotainment system.
Menu item for driving data
Or:
Menu item for the driving data
Resetting the memory in the infotainment system
The memory is reset in the following menu in the in-
fotainment system.
Or:
Settings
Select driving data to be displayed
The driving data to be displayed is selected in the
following Infotainment menu.
Or:
Setting units
The units are set in the following Infotainment menu.
Or:
Speed limit warning
Usage
The system offers the possibility to set a speed limit
beyond which an acoustic warning signal will sound
and the following warning message appears in the
display of the instrument cluster.
›
To set the memory for
the displayed driving
data, press button
A
repeatedly.
›
To reset the memory,
press and hold button
Driver information system ›
Settings
Setting the speed limit
›
Select and confirm the Warning menu item at or
(depending on display type).
›
When the vehicle is stationary, set the desired
speed limit and confirm.
›
While driving, drive at the desired speed and con-
firm it as the speed limit.
Resetting the speed limit
›
Select and confirm the Warning menu item at or
(depending on display type).
›
To reset the speed limit, confirm the stored value.
If the journey is interrupted for more than 2 hours,
the set limit is deactivated, but the set value remains
stored.
Vehicle condition
Display
The vehicle status is displayed in the following menu
in the infotainment system.
Menu item for the vehicle status
Or:
Menu item for the vehicle status
Vehicle areas displayed in colour indicate associ-
A
ated warnings
B
No notification
Warning messages regarding the vehicle con-
dition and their quantity
C
Display of information about the condition
of the START-STOP system
Activation/deactivation of information
▶
regarding the messages of the START-STOP
system in another screen display
Functionality
In the event of a system fault, messages regarding
the fault in question are displayed on the instrument
cluster display when the ignition is switched on.
Speed limit warning
55
Advertisement
Table of Contents
