Driving Data - Skoda KUSHAQ 2021 Owner's Manual

Setting the brightness of the instrument cluster
lighting
The brightness of the instrument lighting is adjusted
automatically according to the given lighting condi-
tions.
When low beam is switched on, the brightness of
the instruments lighting can be adjusted in the fol-
lowing menu in the Infotainment system:
Applies to the 10 " Infotainment system:
strument cluster

Driving data

Overview
The driving data display works with the ignition
switched on.
In the instrument cluster display
Depending on the equipment, the display of the in-
strument cluster shows information such as speed,
fuel consumption, range, etc.
In Infotainment
Applies to the 10 " Infotainment system:
Average fuel consumption
A
Driving time
B
Distance travelled
C
Average speed
D
Range
E
Memory
The system saves the driving data in the following
memories:
From start or "1" (depending on display type)
Driving data from the time of switching on the ig-
▶
nition until the ignition is switched off again is stor-
ed in the memory. If the journey is interrupted for
more than 2 hours, the memory will be reset.
Long term or "2" (depending on display type)
The driving data of all trips up to a total of 99
▶
hours and 59 minutes driving time or 9999 km
driving distance is stored in the memory. If one of
the listed values is exceeded, the memory is reset.
Driver information system ›
From refuelling or "3" (depending on display type)
Driving data from the time the fuel tank was last
▶
filled is stored in the memory. The memory is reset
the next time the tank is filled.
Operation
Display driving data in the display of the instru-
ment cluster via the multi-functional steering
Car In-
wheel
›
In the MAXI DOT display, select the menu item for
driving data in the main menu first.
Displaying driving data in the infotainment system
Applies to the 10
›
Tap on .
›
By moving your finger sideways, choose the screen
with the menu item for driving data.
›
Select the menu item for driving data.
Select memory for driving data in the display of
the instrument cluster via the multifunction steer-
ing wheel and reset it
Selecting the memory in the infotainment system
Applies to the 10
›
Tap on .
›
By moving your finger sideways, choose the screen
with the menu item for driving data.
›
Select the menu item for driving data and memory.
Resetting the memory in the infotainment system
Applies to the 10
strument cluster
Driving data
Turn: Select infor-
A
mation/Set values
Press: Confirm infor-
mation
" Infotainment system:
›
To select the memory
for the displayed driv-
ing data, press control
wheel repeatedly.
A
›
To resetthe memory,
hold the dial
A
" Infotainment system:
" Infotainment system:
45
.
Car In-