Table of Contents
Advertisement
36 Lighting, windscreen wipers and washers ›
Low beam
Removing the defective light bulb
The headlight on the left
Insert a new bulb
›
Change the bulb in the socket.
Front turn signal
The headlight on the left
Replace light bulbs
›
Remove the protective
cap from the headlight.
›
Remove the base with
the bulb.
›
Insert the socket with
the new light bulb into
the headlight, so that
the fixing lug
is
A
pointing up.
›
Fit the protective cap
on the headlight again.
›
Turn and remove the
socket with the bulb.
guide lugs on the socket are aligned with the cor-
responding openings in the headlight.
›
Turn the socket clockwise
Main beam
Removing the defective light bulb
Left headlight
›
Turn the defective bulb
in the socket and re-
move it.
›
Insert a new light bulb
into the socket and se-
cure the light bulb by
turning it in the direc-
tion of
.
›
Insert the socket with
the new bulb into the
headlight so that the
to secure.
›
Remove the protective
cap from the headlight.
›
Unhook the spring
bracket of the bulb to-
wards the inside of the
headlight and to the
right.
›
Fold down the spring
bracket of the light
bulb.
›
Remove the connector
from the bulb.
Advertisement
Table of Contents
