Installing The Lower Triple Clamp - KTM 450 SMR 2021 Owner's Manual

11 SERVICE WORK ON THE CHASSIS
11.10
46
V01432-10
V01433-10

Installing the lower triple clamp

800221-10
Main work
–
Remove indicator lamp holder.
–
1
Open cable holder on the left and detach the wiring har-
ness.
–
2
Remove screw .
–
3
Remove screw .
–
Take off the upper triple clamp with the handlebar and place
to one side.
Info
Cover the components to protect them against damage.
Do not kink the cables and lines.
–
4
Remove O-ring .
–
5
Remove protective ring
–
Remove the lower triple clamp with the steering stem.
–
Remove the upper steering head bearing.
Main work
–
Clean the bearing and sealing elements, check for damage,
and grease.
High viscosity grease (
–
Insert the lower triple clamp with the steering stem. Mount
upper steering head bearing.
–
Check whether upper steering head seal
tioned.
–
2
Slide on protective ring
.
p. 128)
1
is correctly posi-
3
and O-ring .