Handlebar Position; Adjusting The Handlebar Position - KTM 450 SMR 2021 Owner's Manual

10 TUNING THE CHASSIS
10.16
10.17
40

Handlebar position

800116-10

Adjusting the handlebar position

B00375-10
Guideline
Rebound damping
Comfort
Standard
Sport
Info
Turn clockwise to increase damping; turn counterclock-
wise to reduce damping.
–
1
Mount protection cap
On the upper triple clamp, there are 2 holes at a distance of
each other.
Hole distance A 15 mm (0.59 in)
The holes on the handlebar supports are placed at a distance
B
of from the center.
Hole distance B 3.5 mm (0.138 in)
The handlebar can be mounted in four different positions. This
allows the handlebar to be mounted in the most comfortable posi-
tion for the rider.
Preparatory work
–
Remove the handlebar cushion.
Main work
–
1
Remove screws . Take off the handlebar clamps. Remove
the handlebar and lay it to one side.
Info
Cover the components to protect them against damage.
Do not kink the cables and lines.
–
2
Remove screws . Take off the handlebar supports.
–
Place the handlebar supports in the required position.
Info
The handlebar supports are longer and higher on one
side.
Position the left and right handlebar supports evenly.
–
Mount and tighten screws
Guideline
Screw, handle- M10
bar support
–
Position handlebar.
17 clicks
12 clicks
7 clicks
.
2
.
40 Nm (29.5 lbf ft)
Loctite
A
to
® 243™