KTM 450 SMR 2021 Owner's Manual page 110

17 SERVICE WORK ON THE ENGINE
108
–
Mount and tighten screw plug
Guideline
Screw plug, oil
screen
–
Mount and tighten oil drain plug
new seal ring.
Guideline
Oil drain plug with
K01072-10
magnet
–
Remove screws
E01974-10
–
Pull oil filter
Lock ring plier (51012011000)
–
Allow the engine oil to drain completely.
–
Thoroughly clean the parts and the sealing surfaces.
E01975-10
–
Lay the motorcycle on its side and fill the oil filter housing to
about ⅓ full with engine oil.
–
Place the new oil filter into the housing.
–
Lubricate the O-ring of the oil filter cover and mount it with oil
7
filter cover
–
Mount and tighten screws
Guideline
Screw, oil filter cover
E01974-11
–
Stand the motorcycle upright.
–
Remove filler plug
oil.
Engine oil
Info
Too little engine oil or poor-quality engine oil will result
in premature wear of the engine.
401955-12
–
Mount and tighten the filler plug together with the O-ring.
3
with the O-ring.
M20x1.5
1
with the magnet and a
M12x1.5
5
. Remove the oil filter cover with the O-ring.
6
out of the oil filter housing.
.
5
.
M6
8
with the O-ring, and fill up with engine
1.20 l
(1.27 qt.)
15 Nm (11.1 lbf ft)
20 Nm (14.8 lbf ft)
10 Nm (7.4 lbf ft)
Engine oil
(SAE 10W/50)
( p. 126)