11 SERVICE WORK ON THE CHASSIS
11.11
48
V01438-10
G04201-12
Checking steering head bearing play
Warning
Danger of accidents Incorrect steering head bearing play impairs the handling characteristic and dam-
ages components.
–
Correct incorrect steering head bearing play immediately. (Your authorized KTM workshop will be glad
to help.)
Info
If the vehicle is operated for a lengthy period with play in the steering head bearing, the bearings and the
bearing seats in the frame can become damaged over time.
–
Using a plastic hammer, tap lightly on the upper triple clamp
to avoid stresses.
–
8
Tighten screws
.
Guideline
Screw, top triple
clamp
–
Secure the wiring harness with cable holder
–
Mount indicator lamp holder.
Guideline
Remaining screws,
chassis
–
Position the brake line and the clamp. Mount and tighten
bk
screws
.
Finishing work
–
Mount the handlebar cushion.
–
Install front fender. (
p. 51)
–
Install the start number plate. (
–
Install the front wheel.
–
Check that the wiring harness, throttle cables, and brake and
clutch lines can move freely and are routed correctly.
–
Check steering head bearing play. (
–
Remove the motorcycle from the lift stand. (
Preparatory work
–
Raise the motorcycle with a lift stand. (
M8
17 Nm (12.5 lbf ft)
9
on the left.
M6
10 Nm (7.4 lbf ft)
p. 50)
(
p. 85)
p. 48)
p. 42)
p. 42)