Adjusting The Compression Damping Of The Fork; Adjusting The Rebound Damping Of The Fork - KTM 450 SMR 2021 Owner's Manual

10.14

Adjusting the compression damping of the fork

Info
The hydraulic compression damping determines the fork suspension behavior.
10.15

Adjusting the rebound damping of the fork

Info
The hydraulic rebound damping determines the fork suspension behavior.
When disconnecting, excess pressure will escape from the
hose – the fork leg itself does not lose any air.
The fork airpump indicator switches off automatically after
80 seconds.
–
Mount the protection cap.
Info
Only tighten the protection cap by hand.
Finishing work
–
Remove the motorcycle from the lift stand. (
–
Turn adjusting screw
Info
Adjusting screw
right fork leg.
–
Turn counterclockwise by the number of clicks corresponding
to the fork type.
Guideline
V01856-10
Compression damping
Comfort
Standard
Sport
Info
Turn clockwise to increase damping; turn counterclock-
wise to reduce damping during compression.
–
Take off protection cap
–
Turn adjusting screw
Info
Adjusting screw
right fork leg.
–
Turn counterclockwise by the number of clicks corresponding
to the fork type.
M01100-11
TUNING THE CHASSIS 10
p. 42)
1
clockwise all the way.
1
is located at the upper end of the
17 clicks
12 clicks
7 clicks
1
.
2
clockwise all the way.
2
is located at the lower end of the
39