16.6
Teaching the throttle valve position
Info
If the control unit detects that the throttle valve position for idle speed needs to be retaught, then the mal-
function indicator lamp flashes 2x per second.
–
Run the engine until warm.
The cold start button is deactivated – The cold start but-
ton is in its basic position. (
Danger
Danger of poisoning Exhaust gases are toxic and inhal-
ing them may result in unconsciousness and death.
–
Always make sure there is sufficient ventilation
when running the engine.
–
Use effective exhaust extraction when starting or
running the engine in an enclosed space.
–
Set the idle speed by turning the idle speed adjusting
1
screw
.
Guideline
Idle speed
Tachometer (45129075000)
K01110-10
Info
Turning counterclockwise lowers the idle speed.
Turning clockwise raises the idle speed.
Danger
Danger of poisoning Exhaust gases are toxic and inhal-
ing them may result in unconsciousness and death.
–
Always make sure there is sufficient ventilation
when running the engine.
–
Use effective exhaust extraction when starting or
running the engine in an enclosed space.
–
Allow the vehicle to run at idle speed.
The malfunction indicator lamp stops flashing once teach-
ing is completed.
Info
If the engine becomes too hot, perform a cool-down
ride at medium revs.
Then do not switch off the engine after this, but leave it
running at idle speed until teaching is completed.
H02263-10
TUNING THE ENGINE 16
p. 17)
2,100 ... 2,200 rpm
103