Table of Contents
Advertisement
installation
Unit Assembly Prior to Installation (Nailing Flange Installation)
After the framing has been built, the nailing Flanges
will need to be set depending on the depth of finish-
ing material being used. Up to 1-1/4" total material
thickness can be used, including the backing mate-
rial. The depth of finishing material can be adjusted
in 1/4" increments.
1.
If venting the unit in a top vent configuration,
first intall the top vent heat shield with two
screws, as shown.
2.
Determine the required depth setting for the
materials being used.
3.
Once the setting has been chosen, install the
Left and Right Nailing Flanges with 2 screws
on each Flange.
20 | Grandview
G600C Gas Fireplace
®
Left Nailing Flange
Right Nailing Flange
Top Nailing Flange
Nailing Flange Parts
Header Deflector
Advertisement
Table of Contents
