Device Description; General Information - Bosch Rexroth IndraControl S67 Manual

DOK-CONTRL-S67DIO4M12H-AP02-EN-P
Rexroth IndraControl S67 Digital Module High Speed 4 Inputs/Outputs – 0.2 A (84×M12)
4

Device Description

4.1

General Information

The digital input and output module S67-DIO4-HS-M12 inputs or outputs bi‐
nary signals of sensors and actuators with short response times. The module
is provided with fast high-speed inputs and outputs and thus especially suita‐
ble for applications with fast Ethernet-based field buses (e.g. sercos). The
S67-DIO4-HS-M12 module can be operated in four modes:
● DO operation mode
Operation as digital output module (all channels).
Controls digital actuators
● DI operation mode
Operation as digital input module (all channels).
Analyzes digital sensors
● DIO operation mode (delivery state)
Combined operation of digital inputs and outputs (can be parameterized
channel by channel).
This operation mode combines inputs and outputs on one module. All
channels are configured as digital inputs by default
● DIO operation mode + counter:
Combined operation of digital inputs and outputs with counter function.
The counter can be parameterized as event counter, gate time counter
or pulse duration counter
The module is provided with comprehensive parameterization options for in‐
dividual channels as well as for the complete module. Module settings can be
made either field bus-dependent via the device description file (e.g. GSD,
SDDML) of a field bus or field bus-independent via an FDT/DTM frame appli‐
cation (e.g. IndraWorks).
For detailed information on the module parameterization using the
field bus, refer to the corresponding documentation (e.g. "Rexroth
IndraControl S67 Profibus Coupler 8 Digital Inputs (M8))".
For detailed information on the module properties, refer to
4.9 "Technical Data" on page
Bosch Rexroth AG
Device Description
19.
13/79
chapter