Network Connection Check; Printing A Network Connection Check Report; List Of Errors - Epson TM-T88VII Technical Reference Manual

Network Connection Check

Printing a Network Connection Check Report

Print a network connection check report to check whether the printer is properly connected to a network or
not.
1
Print the status sheet.
"Printing a Status Sheet" on page 79
2
Press the Feed button briefly (less than one second) twice.
"Network connection check report" is selected in the setting menu.
3
Hold down the Feed button for at least one second.
The network connection check report is printed.
Wired LAN check report sample
Check Network Connection
Ethernet Cable Connection
IP Address Check
Detailed IP Setup Check
E-01 ethernet disconnect error

List of Errors

Error Number
Ethernet disconnect error
1
Wi-Fi security error
5
MAC Address filtered
6
Incorrect IP Address
8
9 IP Communication error
10 NW setting error
11 Gateway setting error
Wireless LAN check report sample
Check Network Connection
FAIL
SSID Check
NG
Communication Mode Check
Unchecked
Security Mode Check
Unchecked
MAC Address Filtering Check
Security Key/Password Check
IP Address Check
Detailed IP Setup Check
Confirm that the network cable is connected and network devices such as hub, router,
or access point are turned on.
Security mode (e.g. WEP, WPA) does not match the current setting of the printer.
Confirm security mode.
MAC address of your printer may be filtered.
Check whether your wireless router has restrictions such as MAC address filtering.
See the documentation of the wireless router or contact your network administrator
for assistance.
Incorrect IP address is assigned to the printer.
Confirm IP address setup of the network device (hub, router, or access point).
Confirm the connection and network setup of the PC or other device.
Confirm IP address, subnet mask, and default gateway setup.
Setup is incomplete. Confirm default gateway setup.
Chapter 3 Advanced Usage
PASS
PASS
PASS
PASS
PASS
PASS
PASS
PASS
Explanation
82