Part Names And Functions - Epson TM-T88VII Technical Reference Manual

Part Names and Functions

1
2
3
4
5
6
.
1 NFC Tag
2 Roll paper cover
3 Manual cutter
4 Cutter cover
5 Power switch
6 Power switch cover
7 Connector cover
8 Cover open button
9 Feed button
10 Control Panel
11 Dip switch cover
12 Status sheet button
A mark is printed here to indicate the position of the NFC tag. To establish communication with an
NFC device, bring the device close to this mark. For details on functions that use the NFC tag, refer
to "Useful Functions for Smart Devices" on page
• There is no data rewriting function.
• Use Epson ePOS SDK to build this function into your application.
Open this cover to install/replace the roll paper.
Use this cutter when you cut the roll paper manually.
Open this cover to unlock the autocutter blade when the roll paper cover does not open due to a
paper jam.
Turns the printer on or off.
Install the power switch cover onto the printer to prevent inadvertent changing of the power
switch, to prevent tampering, and to improve the appearance of the printer.
To operate the power switch, insert an object with a pointed tip such as a ballpoint pen into the
hole on the power switch cover.
For attaching the power switch cover, refer
Use the printer with this cover attached to protect cables.
Use this button to open the roll paper cover.
Pressing this button once feeds roll paper for one line. Hold down this button to continue feeding
roll paper.
For details on LED, see "Control Panel" on page
Open the cover to view the dip switches for communication settings.
Use this button to print a status sheet on interfaces or initialize the settings on interfaces.
Fixed Interface models have the status sheet button on a different location. See
Model" on page 18.
Chapter 1 Product Overview
10
9
8
7
27.
"Attaching the Power Switch Cover" on page
16.
12
11
48.
"Fixed Interface
15