Software Setting Mode - Epson TM-T88VII Technical Reference Manual

Software Setting Mode

Set the printer's memory switches and customized values.
• Print density
• Auto reduction of amount of paper to use
• Enabling/disabling paper autocutting at cover close
• Paper width setting
• Auto replacement of font
• Print speed
• Command execution (offline)
• Specification for the top margin by backfeed
• Optional external buzzer control
• Interface setting
• Communication conditions using a serial interface
• Communication conditions using a USB interface
• Interface switch wait time
• Main interface selection
• Power supply capacity
• Automatic line feed
• Select paper sensor(s) to output paper-end signals
• ERROR signal when an error occurs
• Thai Character Composition
• Character code table defaults
• International character defaults
For details on the memory switches and customized values, see
Follow the steps below.
1
After running a self-test, hold down the Feed button for at least one second to enter
the Mode selection.
The Mode selection guidance is printed, and the Paper LED flashes.
2
Briefly press the Feed button three times (less than one second), hold it down for at
least one second to enter the Software settings mode (Customized value setting).
The Software setting mode guidance is printed, and the Paper LED flashes.
Chapter 3 Advanced Usage
"Software Settings" on page 59.
73