ZyXEL Communications ARMOR G5 User Manual page 114

Settings > WiFi > WPS
Fig ure 61
The following table describes the labels in this screen.
Table 36 Settings > WiFi > WPS
L ABEL DESC RIPT IO N
WPS
WiFi WPS Status Select
Push Button Use this button when you use the PBC (Push Button Configuration) method.
Click this to start WPS-aware wireless station scanning and wireless security information
synchronization.
WPS Status
Status This displays
and wireless setup or security settings have been changed from default. The current wireless
setup and security settings also appear in this screen.
This displays
changes on the NBG7815 or if you click
security settings to default.
802.11 Mode This is the 802.11 mode used. Only compliant WLAN devices can associate with the
NBG7815.
SSID This is the name of the wireless network (the NBG7815's first SSID) that WPS clients connect to.
Security This is the type of wireless security employed by the network.
Apply Click
Cancel Click
Chapter 10 Wireless LAN
to turn on the WPS feature. Otherwise, select
Ena b le
when a wireless station has connected to the NBG7815 using WPS
C o nfig ure d
if WPS is disabled and there are no wireless setup or security
Unc o nfig ure d
to save your changes back to the NBG7815.
Apply
to reload the previous configuration for this screen.
C a nc e l
NBG7815 User's Guide
114
Disa b le
to restore wireless setup and
Re le a se C o nfig ura tio n
.