ZyXEL Communications ARMOR G5 User Manual page 124

Hide thumbs Also See for ARMOR G5:
Table of Contents

Advertisement

Settings > LAN > IPv6 LAN
Fig ure 70
The following table describes the labels in this screen.
Table 41 Settings > Expert Mode > LAN > IPv6 LAN
L ABEL
DESC RIPT IO N
LAN IPv6 Address Assignment
Enable_DHCPv6-PD
Select this option to use DHCPv6 prefix delegation. The NBG7815 will obtain an IPv6 prefix from the ISP or a
connected uplink router for the LAN.
Autoconfiguration
Select
Type
interface will generate an IPv6 IP address itself from a prefix obtained from an IPv6 router in
the network.
Select
interface. The interface will get an IPv6 address from an IPv6 router and the DHCP server. The
IP address information gets through DHCPv6.
Select
prefixes and other configuration information to DHCP clients.
IPv6 Address range
Enter the beginning of the range of IP addresses that this address object represents.
(Start)
Chapter 11 LAN
to enable IPv6 stateless auto-configuration on this interface. The
SL AAC + RDNSS
to enable IPv6 stateless auto-configuration on this
SL AAC + Sta te le ss DHC Pv6
to allow a DHCP server to assign and pass IPv6 network addresses,
Sta te ful DHC Pv6
NBG7815 User's Guide
124

Advertisement

Table of Contents
loading

This manual is also suitable for:

Nbg7815

Table of Contents