Maintenance Intervals; Tools And Aids; Acrylic Panes - KBL megaSun space 2000 Operating Instructions Manual

Maintenance intervals

Component/
wearing part
Tubes and
starters
operating hours
Colour filters of
tanning device
lighting

Acrylic panes

aquaCool Filter
aquaCool
nozzles

Tools and aids

Hexagon socket screwdriver
4
Wrench sizes: 4mm
Suction cup (supplied)
Number of trained personnel required for
this maintenance task.
Number of authorised and qualified per-
sonnel required for this maintenance task.
The following chapters describe the work steps
required for carrying out maintenance and care
actions. At the beginning of each chapter, the required
tools and aids are depicted, unless the correspond-
ing process can be carried out by one individual per-
son without any further auxiliary equipment.
The assembly is basically carried out in
reverse order of the disassembly.
Exceptions are specifically pointed out.
38
O p e r a t i n g I n s t r u c t i o n s | megaSun space 2000
Cleaning Replacement
Tubes after
After 500 operating
approx. 200
hours
When Whenever UV tubes
necessary are replaced
When
When necessary
necessary
After approx. 2000
operating hour
-
and/or 1 year
When After approx. 1000
necessary operating hours
Acrylic panes
The acrylic panes can exhibit small inclusions and
reams. During operation hairline cracks can also
develop. This does not affect or hardly affects the
tanning properties and does not represent a quality
flaw. The panes are cleaned whenever necessary.
When cleaning the inside, it is recommended to
take the occasion and clean the tubes, too. The
instructions for cleaning and care must be observed.
The outer surface can be cleaned without any
preparatory works.
The panes are dismantled as follows:
Push the pane centrically towards the tubes (e.g.
with your elbow) and pull the upper right-hand corner
of the pane out with the help of the suction cup.
Take hold of the pane from behind and release the
right-hand side in a downward movement. The pane
can then be removed.