Connections - Audio; Connecting An External Audio Source; Level Adjustment Studio Music; Operation Using Different Audio Sources - KBL megaSun space 2000 Operating Instructions Manual

Connections - Audio

For information on further tanning
device
ASSEMBLY INSTRUCTION in the sec-
tion "Connections & Initial operation".

Connecting an external audio source

The cinch marked in the illustration is connected to
the external audio source where the line-out of the
sound player or the headphone/loudspeaker jack are
available for connection.

Level adjustment studio music

The voice / audio system components are installed in
the back part of the tower. The potentiometer which
serves to adjust the external audio signal level is
accessible through a maintenance hatch on the left
hand side of the tower. To avoid overdrive, select
the level adjustment accordingly. The level setting
depends on the strength of the external signal and
should be carried out by a service engineer.
10
O p e r a t i n g I n s t r u c t i o n s | megaSun space 2000
connections, refer to your
Operation using different
audio sources
The tanning device can be operated using the
following audio sources:
• An internal audio source
• Various external audio sources
• All available audio sources
The audio source can be changed via the control
panel.
INTERNAL MP3 PLAYER
When using the internal MP3 player, you can either
play the music tracks that are originally supplied on
the SD card, or you can record your own tracks to
the SD card.