Sd Card - KBL megaSun space 2000 Operating Instructions Manual

Hide thumbs Also See for megaSun space 2000:
Table of Contents

Advertisement

LATERAL PARTS
Dismantle the acrylic pane in the respective lateral
part as described in section "Cleaning and replacing
the acrylic panes".
Remove the two front tubes in the left and right lat-
eral part (they are marked in the illustration below).
Underneath you will find the lighting equipment.
Replace the lighting tube and, if present, the colour
filter, with new parts.
Re-install the UV tubes and the pane.

SD card

REMOVING THE SD CARD
The SD card slot which contains the storage medium
with the MP3 data from the internal MP3 player is
accessible through a maintenance hatch on the left
hand side of the tanning device.
Please refer to the chapter "Technical data" for
information regarding supported card sizes as well as
file-system and MP3 formats. The SD card must not
be formatted, the Voice folder and its contents must
not be changed or deleted. Outside of this folder you
can add or delete audio files as you desire. These
audio tracks are played if the corresponding source
has been selected. The number of files is limited by
the storage capacity of the SD card.
O p e r a t i n g I n s t r u c t i o n s | megaSun space 2000
41

Advertisement

Table of Contents
loading

Table of Contents