Service Codes; Service Menu - Options - KBL megaSun space 2000 Operating Instructions Manual

Service codes

SERVICE-CODE LEVEL 1
Access to the service menu start window is pro-
tected by CODE 1. When delivered, this CODE is
00000. Optionally, the factory-set protection can be
replaced by an individual CODE in the service menu,
item
>SERVICE/SERVICE-CODE/Service Code Level 1<
SERVICE-CODE LEVEL 2
Some menu items are protected by CODE 2. Each
tanning device has its own CODE 2.
You will receive your CODE 2
(Service Code Level 2) with the
tanning device documentation.
Optionally, the factory-set CODE 2 can be sup-
plemented by an individual CODE 2 in the service
menu, item
>SERVICE/SERVICE-CODE/Service Code Level 2<
Access to the service menu start window can be
done directly with the CODE 2. In this case all CODE
2 protected menu items are immediately activated.
• The factory-set CODE 2 remains valid even
if an individual CODE 2 is set.
• Individual CODES are not reset by loading
the factory settings.
• The one-time input of CODE 2 immediately
activates all protected menu items.
In the following chapter, you will recognize
CODE 2 protected menu items by the ser-
vice menu.
24
O p e r a t i n g I n s t r u c t i o n s | megaSun space 2000

Service menu - options

• Always remember to save your settings by pressing
STORE.
• All menu items that comprise further submenus are
displayed in CAPITAL LETTERS.
①
S S
mega mega un un
> German
> English
Sets the language of the menu.
Factory setting: German
②
> 00000.. . 00030
Sets the contrast of the interior control panel
display.
Factory setting: 00020
In order to avoid operating errors, read
through the basics at the beginning of
the "Service Menu" section.
ENVIRONMENT
Language
>
ENVIRONMENT
Contrast
>
01/05
02/05