Tanning Mode; Starting The Tanning Session; Operation During The Tanning Session - KBL megaSun space 2000 Operating Instructions Manual

Tanning mode

Excessive dose of UV radiation
Excessively prolonged tanning sessions
may cause severe damage to skin and
eyes.
• Never operate the tanning device with a
defective timer.
• Observe the tanning times given in the
tanning schedule.
The following explanations and functions refer to a
tanning device that is fully equipped with all features.

Starting the tanning session

During the tanning session, the door must remain
closed in order to ensure that the ventilation works
properly.
• Close the door and place yourself in the middle of
the tanning device booth, with body positioned an
equal distance form the surrounding lamps.
• Put on protective goggles.
• The tanning session automatically starts after the
studio-timer controlled delay time has expired.
During the preset delay time the tanning session
can be started anytime manually using the START
button at the tanning device.
ARROW BUTTONS
• Allows the selection of
subordinate functions.
STOP BUTTON
• Stops the tanning session
if pressed for at least two
seconds.
16
O p e r a t i n g I n s t r u c t i o n s | megaSun space 2000
WARNING
+ -
/ BUTTONS
• Control the functions.
DISPLAY
• Shows the menu items and
functions.
• Indicates the tanning time.
• Information line.
Operation during the tanning
session
You can control the functions of the tanning device via
the interior control panel during the tanning session.
It is particularly easy for you to access the basic
functions. Buttons with recesses that can easily be
sensed allow for easy operation of the system even
with your eyes closed.
NOTES:
20 seconds after your last input, the Interior controll
panel display changes over to the indication of the
tanning time. An information line at the bottom edge
of the interior control panel shows the current music
track.
Position
recessed button
START BUTTON
• Starts the tanning session during the timer con-
trolled delay time,
• as well as after an interruption caused by pressing
the STOP button, provided that the booked tan-
ning time has not elapsed yet.