Set Decorative Lighting - KBL megaSun space 2000 Operating Instructions Manual

Hide thumbs Also See for megaSun space 2000:
Table of Contents

Advertisement

Set decorative lighting

For remote control of the color mode, you may use
our colorMotion controller. Available only for tanning
devices with LED technology.
To control the color mode of the tanning device
use the stylish colorMotion controller with its
elegant colorWheel and its full touch panel. Change
brightness, turn on and off the lighting, select static
colors or select one of the automatic color change
programs. This wireless control technology allowes
remote control from various directions with just a
finger touch.
Low power consumption and awakening
After 20 sec. without touching the controller will
automatically enter the low power sleep mode. Touch
any key to wake up the controller to normal use.
Match code function
In order to control several tanning devices with
one
RF-controller press down the match code
button on the LED controller and the "I" button at
the RF-controller at the same time, wait for the LED
lamp flashing several times, then move away from
the two buttons. To cancel match, press down the
match code button on the LED controller and the "O"
button at the RF-controller at the same time, wait for
the LED lamp flashing several times, then move away
from the two buttons.
The LED controller is
located in the door of
the tanning decice.
36
O p e r a t i n g I n s t r u c t i o n s | megaSun space 2000
match Taste
COLORMOTION CONTROLLER
colorMotion controller - control elements
On / Off
Decorative lighting.
The selected setting automatically will be
saved when the system is switched off.
Program selection switch
Program
1
2
3
4
5
6
7
8
9
10
11
12
13
13
15
16
17
18
colorWheel
By touching the colorWheel the selected
color switches on and additionally the pro-
gram selection will be reset. At the next
program selection, the program 1 (RED) will
start.
Increases / decreases the intensity of the
static colors (Program 1-7).
Increases / decreases the repetition rate
(Program 8-18).
Decorative lighting
On / Off
Program selection switch
colorWheel
Brightness or frequency
increase / decrease
Mode
Note
RED
GREEN
BLUE
Intensity
YELLOW
adjustable
PURPLE
CYAN
WHITE
3 color - jump
7 color - jump
3 color - gradient
3 color - smooth
7 color - gradient
Frequency
adjustable
7 color - smooth
(Repetition rate)
3 color - flicker
7 color - flicker
3 color - flash
7 color - flash
Auto play

Advertisement

Table of Contents
loading

Table of Contents