Configuring General Phone Settings; Selecting The Language - Mitel 6940 User Manual

C 5
HAPTER

Configuring general phone settings

This section explains other settings you can make on your phone.

Selecting the language

You wish to select a different user language for your display.
To change both the local user language and the user language of the MiVoice Office 400 communication
system, configure the language settings for your phone over the Self Service Portal only. For more infor-
mation about the Self Service Portal, please refer to
The language selection depends on the language packages your system administrator installed on your
phone. English is the default language and is included in every language package. Should your desired
language not be available, your system administrator can install more language packages.
If your desired language is available, but is not displayed or displayed only in parts, you have to restart
your phone (see chapter
"Restart phone").
C
ONFIGURING GENERAL PHONE SETTINGS
Add and connect Bluetooth headset:
Press Bluetooth.
1.
Press Available devices.
2.
→ All available Bluetooth headsets are
searched and displayed automatically.
Select the desired Bluetooth headset.
3.
→ The selected headset is connected auto-
matically. Please see the product specific us-
er's guide of your Bluetooth headset for
individual steps you have to carry out for
your headset.
Confirm successful connection with the Ok
4.
softkey.
Disconnect Bluetooth headset:
Press Bluetooth.
1.
→ Bluetooth mode must be activated.
Press Paired Devices.
2.
Select the desired headset and press the
3.
Disconnect softkey.
→ Bluetooth mode must be activated.
Press Ok button to acknowledge the
4.
successful disconnection.
"MiVoice Office 400 Self Service
P
ERSONALIZING YOUR PHONE
Portal".
88