Configuring General Phone Settings; Selecting The Language - Mitel 6920 SIP Manual

Press the Option key.
Scroll to Audio.
Setting the audio mode:
1. Scroll down to
selection key.
2. Select the mode you want and confirm with the
Setting the headset:
1. Scroll down to
tion key.
2. Select the volume you want or DHSG and confirm with the

Configuring general phone settings

This section explains other settings you can make on your phone.

Selecting the language

You wish to select a different user language for your display.
To change both the local user language and the user language of the
MiVoice Office 400 communication system, configure the language set-
tings for your phone over the Self Service Portal only. For more information
about the Self Service Portal, please refer to "MiVoice Office 400 Self Ser-
vice Portal", page 9.
The language selection depends on the language packages your system
administrator installed on your phone. English is the default language and
is included in every language package. Should your desired language not
be available, your system administrator can install more language pack-
ages.
If your desired language is available, but is not displayed or displayed only
in parts, you have to restart your phone (see chapter "Restart phone",
page 84).
Mitel 6920 SIP
eud-1763/1.0 – R5.0 HF1 – 08.2017
Audio Mode using the navigation key and confirm with the
Headset using the navigation key and confirm with the selec-
Personalizing your phone
Save softkey.
Save softkey.
81