Locking/Unlocking Your Phone - Mitel 6940 User Manual

C 4
HAPTER
: When you have activated ring alone but deactivated the personal call routing for a phone in
NOTE
parallel, an incoming call is not acoustically but only visually signaled.

Locking/Unlocking your phone

You need to leave your desk and want to ensure that no-one can alter your phone's settings, look at your
private data, or make calls from your phone.
You can lock your phone with a 2 to 10-digit PIN (for more information on the PIN, see chapter
the PIN").
You must save this function to a configurable key using Self Service Portal (see chapter
deleting a key assignment").
:
NOTE
Activating/deactivating ring alone
Press the function key for Ring Alone on/off.
→ Function is activated/deactivated, LED on the
expansion key module and the LCD on the phone
is switched on/off.
Activating the phone lock:
Press the function key for Phone lock on/off.
→ The phone is locked and can only be unlocked
using your PIN.
line.
Deactivate the phone lock:
Press the function key for Phone lock on/off.
1.
Enter the PIN and confirm with the Enter
2.
softkey.
Confirm the security prompt with the Yes
3.
softkey.
Use the following function codes (see also
Features Overview Mitel 415/430/470 user guide
on the \_Mitel DocFinder), to activate or
deactivate the phone lock for all phones within
the one number user concept (see
user concept"):
• Activating the phone lock: Enter the function
code *33* <PIN> #
• Deactivate the phone lock: Enter the function
code #33* <PIN> #
U
SING FURTHER FUNCTIONS
"Changing
"Configuring or
is displayed in the status
"One number
P
HONING
50