Configuring General Phone Settings - Mitel 6865 SIP User Manual

Personalizing your phone
Press the Option key.
Scroll to
Scroll to
Setting the audio mode:
1. Scroll to
2. Select the setting you want and confirm with the
Setting the headset volume (Mitel 6865 SIP only):
1. Scroll to
2. Select the setting you want and confirm with the

Configuring general phone settings

This section explains other settings you can make on your phone.
Selecting the language
You wish to select a different user language for your display.
To change both the local user language and the user language of the
MiVoice Office 400 communication system, configure the language set-
tings for your phone over the Self Service Portal only. For more information
about the Self Service Portal, please refer to "MiVoice Office 400 Self Ser-
vice Portal", page 9.
The language selection depends on the language packages your system
administrator installed on your phone. English is the default language and
is included in every language package. Should your desired language not
be available, your system administrator can install more language pack-
ages.
If your desired language is available, but is not displayed or displayed only
in parts, you have to restart your phone (see chapter "Restart phone",
page 81).
78
Preferences and press the navigation key to the right.
Set Audio and press the navigation key to the right.
Audio Mode and press the navigation key to the right.
Headset Mic Vol and press the navigation key to the right.
Set softkey.
Set softkey.
Mitel 6863 SIP / Mitel 6865 SIP
eud-1663/2.0 – R6.0 – 06.2018