Automatic Call Waiting In Case Of Internal User - Mitel 6940 User Manual

C 4
HAPTER
:
NOTE
:
NOTE

Automatic call waiting in case of internal user

You would like to talk to an internal user whose line is currently busy.
By using the function Automatic call waiting, this user in informed that you would like to talk to him. When
you use the call waiting function, the user receives a call waiting tone (duration and frequency of the tone
depend on system settings) and your phone number or name appear on their display. The user may
accept or refuse your call.
Requirements:
• Your system administrator must authorise you to use the function call waiting in the MiVoice
Office 400 communication system.
• The internal user must not have blocked the function call waiting on their phone (see chapter
vating protection against call types"
: If the user is making an enquiry call or is in a conference, the function Automatic call waiting cannot
NOTE
be used.
Pick up the handset.
→ The phone number displayed is dialed.
When you hang up, dialing by name and your
private phone book remain available for a whole
minute so you can make another call.
Private calls:
Enter function code #46 for a private call.
1.
Enter your internal phone number.
2.
Enter your PIN.
3.
Enter the external call number directly,
4.
without the exchange access digit.
Pick up the handset.
5.
→ The phone is now enabled; the external user is
called.
The default PIN setting '0000' is not accepted (for
more information on the PIN, see chapter
"Changing the
for configuration).
Call waiting:
The person you want to talk to is busy. The phone
automatically executes the function call waiting.
PIN").
I
NITIATING CALLS
P
HONING
"Acti-
35