Ep Switch Lever - Sony SVT-RA40 Service Manual

3-18-3. EP Switch Lever

1. Refer to Section 3-3-1 and remove the cassette mecha-
nism assembly.
2. Remove the EP switch spring 1.
3. Remove the clamp 2, then remove the EP switch
lever 3.
Assembly Notes:
1. Apply grease (VHJ-0100) to the protrusion 4 on the
back of the EP switch lever 3.
2. After fitting the cassette mechanism assembly, check
that in EJECT mode, the EP switch lever 3 does not
touch the EP switch 5.
4 Protrusion on
back
(apply grease here)
5 EP switch
Fig. 3-18-3
2-32
1 EP switch spring
3 EP switch lever
2 Clamp
SVT-RA40/RA168