3-9. Pinch Roller Pressur Mechanism
3-9-1. Pinch Roller Lever Assembly
1. Remove the clamp 1, then remove the pinch lift
mounting 2.
2. Remove the spring 3, then remove the pinch roller
lever assembly 4 off the pinch lift mounting 2. Be-
fore you do this, align the Indentation 5 on the pinch
roller lever assembly 4 with the clamp 6 on the
pinch lift mounting 2.
Assembly Note:
1. Be careful to keep the surface of the pinch roller free
of dust and dirt.
4 Pinch roller lever
assembly
5 Indentation
6 Clamp
Fig. 3-9-1
2-20
3 Spring
2 Pinch lift mounting
1 Clamp
SVT-RA40/RA168