3-4. Cleaner Roller Assembly
1. Remove the clamp 1 and take out the cleaner lever
2. When you do this, be careful not to bend the
plastic springs A and B on the cleaner lever 2.
2. Remove the clamp 3, and take out the cleaner roller
assembly 4. Be careful not to touch the sponge on the
cleaner roller assembly 4.
Assembly Notes:
1. When mounting the cleaner lever 2 on the shaft 5,
press the clamp 1 in the direction shown by the
arrow, and snap it into the mounting 6 on the audio
R/P head assembly.
B Plastic spring
Fig. 3-4-1
2-14
4 Cleaner roller assembly
3 Clamp
2 Cleaner lever
1 Clamp
A Plastic spring
5 Shaft
6 Mounting
SVT-RA40/RA168