Table of Contents
Advertisement
3-13. Brakes
3-13-1. S Brake Assembly, T Brake
Assembly, T Brake Act Slide
1. Refer to Section 3-3-1 and remove the cassette mecha-
nism assembly.
2. Remove the two clamps 1, then remove the T brake
act slide 2.
n
You can remove the S brake assembly 7 and the T
brake assembly 5 without removing the T brake act
slide 2.
3. Remove the brake spring 3.
4. Remove the two clamps 4 simultaneously, then
remove the T brake assembly 5.
5. Remove the clamp 6, then remove the S brake
assembly 7.
Assembly Notes:
1. Apply grease (VHJ-0100) to the shafts 8 and 9.
2. When fitting the T brake act slide 2, align the mark
0 with the shaft !-.
1 Clamp
3 Brake spring
7 S brake
assembly
6
Clamp
9 Shaft
Fig. 3-13-1
SVT-RA40/RA168
2 T brake act slide
0 Mark
1 Clamp
5 T brake
assembly
!- Shaft
8 Shaft
4 Clamps
3-13-2. Brake Control Lever and Brake Act
Lever Assembly
1. Refer to Section 3-2 and remove the mechanism unit.
2. Refer to Section 3-15 and remove the wheel gear 2.
3. Refer to Sections 3-12-1, then remove the reel belt and
the reel pulley.
4. Remove the clamp 1, then remove the wheel gear 1
2.
5. Remove the clutch change spring 3.
6. Remove the clamps 4 and 5, then remove the brake
control lever 6. Remove the clamp 4 on the topside
of the mechanism chassis.
7. Remove the brake return spring 7.
8. Refer to Section 3-8 and remove the worm gear
assembly.
9. Remove the clamp 8 and clamp 5, then remove the
brake act lever assembly 9. To maintain the perfor-
mance of the brake act lever assembly 9, do not
disassemble it.
Assembly Notes:
1. Apply grease (VHJ-0100) to the shafts 0 and !-, to
the teeth of the wheel gear 1 2, and to the pin != of
the brake control lever 6.
2. Put the pin != of the brake control lever 6 into the
cam groove ![ of the crescent slide.
3. Before fitting the wheel gear 1 2, align the hole !]
with the hole !\ on the mechanism chassis.
4. Refer to Section 3-15 and align the wheel gear 2.
6 Brake control lever
4 Clamp
1 Hole
1 Clamp
2
Wheel
gear 1
!- Shaft
!\ Hole
Fig. 3-13-2
!= Pin
3 Clutch change spring
9 Brake act lever
assembly
7
Brake return spring
8 Clamp
