Warning Messages; Diagnostics Messages - Dell Precision 330 User Manual

164 So lv ing Pr o ble m s
S y s t e m B e e p C o d e s ( c o n t i n u e d )
Code Cause
4-4-1 Serial or parallel port test failure Run the Serial Ports and the Parallel
4-4-2 Failure to decompress code to
shadowed memory
5-2-2-1 Mismatch Rambus dynamic
random-access memory
(RDRAM) device count;
unsupported RIMM device
count or technology
5-2-2-2 Mismatch channel pair
5-2-2-3 RDRAM levelization failure

Warning Messages

Your application programs or operating system generate warning messages
to alert you to a possible problem and ask you to take an action before you
continue. For example, before you format a diskette, a message may warn
you that you can lose all data on the diskette as a way to protect against
inadvertently erasing or writing over the data. These warning messages
usually interrupt the procedure and require you to respond by typing a
(yes) or (no).
n

Diagnostics Messages

When you run a test group or subtest in the
message may result. These error messages are not covered in this section.
Record the message on a copy of your
Dell for technical assistance.
Action
Ports tests in the Dell Diagnostics.
Run the System Board Devices tests in
the Dell Diagnostics.
Verify that both RIMM sockets contain
a RIMM or Rambus continuity RIMM
(CRIMM). If the problem recurs,
replace the module in socket 2 (if any),
then the module in socket 1. If the
problem is still not resolved,
Dell for technical assistance.
See "System Memory Problems."
Verify that both RIMM sockets contain
a RIMM or CRIMM. If the problem
recurs, replace the module in socket 2
(if any), then the module in socket 1. If
the problem is still not resolved,
contact Dell for technical assistance.
Dell Diagnostics, an error
Diagnostics Checklist and
contact
y
contact