Dell Precision 330 User Manual page 80

80 Ins ta l l i n g Up g r a d es
Remove the front
3
Remove the drive bracket from the chassis.
4
Pull the drive door forward and down until the hard-drive bracket is
ejected halfway out of the chassis (see the following figure). Then
grasp the bracket and pull it completely out of the chassis.
R e m o v i n g t h e H a r d - D r i v e B r a c k e t ( M i n i To w e r C h a s s i s )
If a drive is already installed in the bracket, disconnect the DC power
cable and interface cable from the back of the drive before removing
the bracket from the chassis. To remove the old drive from the bracket,
panel.
drive door
hard-drive
bracket
drive door
handle