Yes. The problem is resolved.
No. Go to
step
2.
Run the printer's self-test.
2
Does the self-test complete successfully?
Yes. Go to
step
3.
No. The printer is probably defective. If you bought the printer from
Dell,
contact Dell
for technical assistance. If you did not, take it to an
authorized service center for repair.
Try to print again.
3
Does the print operation complete successfully?
Yes. The problem is resolved.
No.
Contact Dell
for technical assistance.
Serial or Parallel Device Problems
NOTE:
If you are having a problem with a printer, see
If a system error message indicates a port problem or if equipment
connected to a port seems to perform incorrectly or not at all, the source of
the problem can be any of the following:
•
A faulty connection between the input/output (I/O) port and the
device
•
Incorrect settings for
•
Incorrect settings in the operating system's configuration files
•
A faulty cable between the I/O port and the device
•
A faulty device
•
Faulty I/O port logic on the system board
•
Conflicting COM port settings
•
Lack of drivers
Basic Checks:
•
Disconnect the cable from the computer and check the cable
connector for bent or broken pins. Check for damaged or frayed cables.
system setup
options
"Printer
Problems."
127
S o lv ing Pr o ble m s